ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
[Cable Wiring]
A
Rotate the panel portrait.
(See page 8 for PANEL ROTATION.)
B
Remove the back cover from the stand. Pull top
of cover outward to open.
C
Pass the cables through the hole.
D
Connect the cables to the monitor.
E
Put the cables in clips located inside the stand.
F
Replace back cover by inserting bottom of cover
into guide holes. Push forward to close, making
sure the top ‘clicks’ into place.
G
Tie the cables at upper and lower exits of the
stand with Tie-wraps as required.
B
C
D
G
F
F
E
G
COMPUTER SETTING
n
Signal Timing
When you connect the monitor to the computer for the first time, set the signal timing of the
computer to VGA before connection. Change to the desired signal timings listed on page 19 in
COMPLIANT TIMING, after you confirm that the picture appears normally at VGA.
n
Windows 95/98/Me/2000 Plug & Play
The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs
on Windows 95/98/Me/2000 by connecting the monitor to DDC1/2B compliant computer with the
Signal Cable supplied. Windows 95/98/Me/2000 Monitor Information File for iiyama monitors may
be necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com (U.S.A.)
http://www.iiyama.co.uk (U.K.)
NOTE
For additional information on how to download the driver for your monitor, please access
one of the internet sites noted above.
