___________________________________________________________________
Page 17 of
29
System Installation
Figure 2.5 Take Down Storion-SMILE-B3 Upper Cover Plate
Step 4: Use the M5 internal hexagon wrench to unscrew the screws. After pulling out the
connecting wire harness on the back of the upper cover plate, remove the B3 upper cover plate
to prepare wiring, as shown in Figure 2.5.
Note: the internal 63A and the external 80A switch must be switched off to prevent
short circuit.
Figure 2.6 Earthing Bonding Position
Step 5: the earthing bonding position for Storion-SMILE-B3 is as shown in Figure 2.6, please
use the M4*12 screw.
In any case, the first step
after unpacking is turning off
the switch of 63A and 80A.
