iiNet TG-1 User Manual Download Page 26

Page: 26 / 65

WIRELESS NETWORKING

DMS3-CTC-25-115 v1.0

3.3 Connecting your wireless client by scanning a

QR code

Introduction

The TG-1 Gateway allows you to generate a Quick Response (QR) code that contains all wireless settings
that are needed to connect. You are then able to connect to the wireless network by scanning the
generated code.

Target devices

This connection method is typically used for tablets and smartphones.

Requirements

Your wireless device must have:



A camera to scan the code.



An application (app) to interpret the QR code and connect to a wireless network.

For example: if you are using Android on your device, you may download

QR Droid

from

Google Play

Procedure

Proceed as follows:

Browse to the TG-1 Gateway GUI.
For more information, see

“4.1 Access from your local network” on page 29

Click

Wireless

. The

Wireless

page appears.

Under

QR Code

, click

Generate QRCode

The wireless QR code appears.

You can now:



Scan the code directly from your screen.



Print this page and scan the code from the paper version.

Summary of Contents for TG-1


































































Search results

Summary of Contents for TG-1

Reviews:

Related manuals for TG-1

Brands by name

Popular brands

iiNet TG-1, User Manual

Search results

Summary of Contents for TG-1

Reviews:

Related manuals for TG-1

Brands by name

Popular brands