iiNet TG-1 User Manual Download

Page: 12 / 65

GETTING STARTED

DMS3-CTC-25-115 v1.0

1.1.6 Status LEDs

Introduction

On the TG-1 Gateway, you can find a number of status LEDs, indicating the state of the device.

Status LED

The

Status

( ) LED provides information about the overall state of your TG-1 Gateway:

WAN LED (if you are using the DSL gateway scenario)

Status

Ethernet

Phone

Wireless

WAN

Internet

WPS

Colour

State

Description

Green

Solid on

All services are available. The wireless access point is

enabled

Red

Solid on

Some services are not available.

Orange

Solid on

Bootloader selftest.

Blinking

Bootloader active (during upgrade).

Off

The TG-1 Gateway is powered off.

Colour

State

Description

Green

Solid on

DSL line synchronised.

Blinking

Trying to detect carrier signal or pending DSL line
synchronisation.

Off

DSL line synchronised and operating in single line mode.
- or -
TG-1 Gateway powered off.

Summary of Contents for TG-1


































































Search results

Summary of Contents for TG-1

Reviews:

Related manuals for TG-1

Brands by name

Popular brands

iiNet TG-1, User Manual

Search results

Summary of Contents for TG-1

Reviews:

Related manuals for TG-1

Brands by name

Popular brands