8
9
Connecting your computer to BoB2
TM
Connecting BoB2
TM
to your computer
Before connecting to your computer, make sure the blue ADSL sync and Internet lights on the front of
BoB2
TM
are illuminated.
If the lights are not illuminating refer to the troubleshooting section of the BoB2
TM
manual or contact iiNet
support using the numbers on the back page.
You can connect multiple computers and laptops using one of the methods below.
Wireless
Please refer to the Wireless Setup Guide for instructions on connecting your computer wirelessly.
Ensure the computer you use has wireless inbuilt and is turned on, or has an external wireless adapter.
Wired
Using the supplied yellow ethernet cable:
1.
Plug the yellow Ethernet cable into one of the four yellow ports on the side of BoB2
TM
.
2. Plug the other end into your computer’s Ethernet port.
3. Wait 15 seconds.
4. Open up a web page on your computer.
ADS
L
LINE
PHONE
Power Cable
Phone Cable
Line Filter
Phone Cable
Ethernet Cable
Connecting your computer to BoB2
TM
Power
Summary of Contents for BOB2
Page 1: ...Read this first ...
