6
7
Option 2
Option 2
Option 2 :
You’ve signed up for iiNet broadband and you still have a traditional
landline for BoB2
TM
to connect with.
3
2
4
1
1.
Connect the power adapter to the power port on BoB2
TM
. Plug the power
adapter into the wall socket. Turn the BoB2
TM
power button on and wait for
the green light to illuminate.
2. Plug one of the phone cables (which can be found in your BoB2
TM
box) into
the socket labelled ADSL on the right hand side of BoB2
TM
.
3. Take the line filter out of the box. Plug the other end of the phone cable
into the ADSL socket on the line filter. Then, plug the line filter into your
wall phone socket. If your existing home phone is plugged into the wall
socket - you will need to remove it first.
4. The next step is to take the second phone cable (which can be found in
your BoB2
TM
box). Plug one end into the line filter marked Phone and the
other end into the black socket labelled PSTN fail over on BoB2
TM
.
5. Your setup should look like the image on the opposite page. If you have
an active iiNet connection BoB2
TM
will automatically start talking to iiNet’s
servers. BoB2
TM
will retrieve your login details and other settings during this
time, so please leave BoB2
TM
connected and give him some time to set
himself up. If you are waiting for your iiNet DSL service to be activated
then BoB2
TM
will be unable to connect to the internet.
Now go to page 8
to connect BoB2
TM
to your computer.
6. To make phone calls, you will need to enable your handset. Simply place
the batteries into the handset. For further information, refer to the BoB2
TM
handset manual located in its box.
Power Cable
Phone Cable
Line Filter
Power
Summary of Contents for BOB2
Page 1: ...Read this first ...
