II Morrow Inc. Apollo NMC, Operating Manual

Page: 34 / 367

Power-Up Sequence (continued)
Press ENT To
Reset Airspace
Setups
NAV
If Emergency Search settings restricting runway lengths and/or
surface types and/or lighting requirements are entered, the display
below appears for up to 4 seconds.
Emergency Search
Is Non Standard
SEL To Reset
NAV
To reset the Emergency Search settings, press SEL within 4 seconds,
then press ENT , as shown on the screen below, or press SEL to cancel.
Press ENT To
Reset Emergency
Search Setups
NAV
If the 2030 Fuel/Air Data Sensor is installed, the NMC displays the
next screen until SEL is pressed.
FUEL ON BOARD
Must Be Verified
Press SEL
NAV
Enter the total amount of fuel which is in the airplane’s tanks including
reserve, by rotating the Small and Large knobs to edit the displayed
values, then press ENT . If the cursor is flashing on the word “FULL”
when ENT is pressed, the amount of fuel displayed will become the
maximum amount of fuel previously entered, and the cursor will flash
on the number. Pressing ENT again will enter the number as the
current total fuel on board.
20
Power-Up Sequence Operations