background image

 

Specifications 

2017-03-31 

39

 

Specifications 

Pos: 26 /806-IHSE/Technische Daten/Schnittstellen/UEB_Schnittstellen @ 5\mod_1278578201870_6.doc @ 42114 @ 2 @ 1 

 

7.1 

Interfaces 

Pos: 27 /806-IHSE/Technische Daten/Schnittstellen/VGA @ 12\mod_1410274972923_6.doc @ 149777 @ 3 @ 1 

 

7.1.1 

VGA 

The video interface supports the VGA protocol. All signals that comply to 
DVI-D Single Link norm can be transmitted. This includes e.g. monitor 
resolutions such as 1920x1200@60Hz, Full HD (1080p) or 2K HD (up to 
2048x1152). Data rate is limited to 165 MPixel/s. 

 

Pos: 28 /806-IHSE/Technische Daten/Schnittstellen/484-xx (USB-HID) @ 12\mod_1410275051559_6.doc @ 149803 @ 3 @ 1 

 

7.1.2 

USB-HID 

Our devices with USB-HID interface support a maximum of two devices 
with USB-HID protocol. Each USB-HID port provides a maximum current 
of 100 mA. 

 

Keyboard 

Compatible with most USB keyboards. Certain keyboards with additional 
functions may require custom firmware to operate. Keyboards with an 
integral USB Hub (Mac keyboards e.g.) are also supported.  

 

Pos: 29 /806-IHSE/Technische Daten/Schnittstellen/USB 2.0 (transparent) @ 5\mod_1278578316386_6.doc @ 42168 @ 3 @ 1 

 

7.1.3 

USB 2.0 (transparent) 

CPU Switch models with transparent USB 2.0 support allow the 
connection of 

all

 types of USB 2.0 devices (without restriction). USB 2.0 

data transfer is supported, depending on the upgrade module, with USB 
high speed 

(

max. 480 Mbit/s) or USB full speed (max. 36 Mbit/s). 

Each USB full speed port provides a maximum current of 500 mA (high 
power). When using a USB high speed interface with 4 USB ports, 
respectively 2 connectors provides a maximum of 500 mA (high power) 
and 2 connectors a maximum of 100 mA. 

 
 

Pos: 30 /806-IHSE/Technische Daten/Schnittstellen/Analoge Audio-Schnittstelle @ 5\mod_1291127716734_6.doc @ 44846 @ 3 @ 1 

 

Summary of Contents for L484-8VHSWR

























































Reviews: