background image

42    |    kvm-tec

Misprints, errors and technical changes reserved

Misprints, errors and technical changes reserved

kvm-tec    |    43

7.1 REQUIREMENTS FIBER CABLE

7.1.MULTI-MODE (STANDARD)

A multi-mode fiber cable should meet the following requirements

• 

The maximum length should be 300 m (984ft).  The media4Kconnect is equipped with a 
multimode -  SFP+  module, which allows a transmission distance of up to 300 m /984ft

• 

Dedicated fiber optic connection cable type OM4  Duplex Multimode with LC plug 

7. CABLE REQUIREMENTS  

8. SWITCH SPECIFICATION

8. REQUIREMENTS NETWORK SWITCH

The entire switching network system requires its own separate network. For security reasons, it 
cannot be integrated into an existing corporate network.

The network switch must meet the following specifications:

Full HD:

 1Gigabit Switch

4K:

 10Gigabit Switch

Network requirements Matrix System UDP Version

The KVM-TEC Matrix Switching System communicates via IP 
between the individual endpoints (local/CPU or remote/CON), as well as with the KVM-TEC Swit-

ching Manager, Gateway2Go and API. Sharing of videos is realized via the IGMP function of the 

switch via multicast. 
Each endpoint joins a multicast group, even if only one connection is established. This process is 
repeated cyclically so that the switch keeps the multicast group active. 

One exception is the Gateway2Go, which uses unicast and communicates via UDP just like the 

other devices.

The following UDP ports are required for the transmission:

Port Number 53248 (0xD000) to 53260 (0xD00C) 

and Port Number 50000 (0xC350)

These ports must be taken into account when configuring the firewall. For the connection via 

WAN a secured VPN connection is necessary.

The KVM-TEC Matrix system supports DHCP management of IP addresses, static IP addresses are 
possible, internal default address range and assignment of IP addresses via a DHCP server. To 

meet all these requirements, the use of Layer 3 switches is recommended.

8.1 SWITCHES

For information on switches, please contact our sales team at 

[email protected]

or our support at 

[email protected]

Summary of Contents for Kvm-Tec KT-6935L

























Reviews: