Draco tera
138
2014-04-15
For an efficient macro configuration the following context functions are
available:
When clicking on the
Macros
tab, macros can be assigned to other
consoles by using the
Assign Macros to ...
function and can be
copied from other consoles by using the
Copy Macros from ...
function.
When clicking on the macro list, macros of the selected key can be
copied into the cache by using the
Copy Key Macros
function. You
can paste the macros from the cache into a key by using the
Paste
Key Macros
function and you can reset all macros of the selected
key by using the
Reset Key Macros
function.
Pos: 87 /806-IHSE/Konfiguration/480_Konsolen-Einstellungen/480-xx/Konkurrierende Bedienung @ 9\mod_1375170037949_6.doc @ 79211 @ 3 @ 1
5.9.6 Parallel Operation
This menu enables parallel operation of a CPU Device by two or more
CON Devices. A CPU Device can be controlled by only one CON Device
at a time but can be taken over successively by other CON Devices.
Control of a CPU Unit by a CON Unit is relinquished after the expiry of an
inactivity timer associated with the controlling CON Device. The mouse or
keyboard may also be used to take control.
In order to allow a smooth and accurate function of the parallel operation,
you should use identical mice and keyboards. They should be connected
to the same USB-HID ports of each CON Unit.
When taking over control within 10 s, any assigned USB 2.0 / 3.0
extenders, if available, will not be switched due to security and stability
aspects.
The alternative is using the USB-HID Ghosting (see Chapter
Page 193).
You have the following options to configure parallel operation:
