INNOVATIVE
HEARTH PRODUCTS • KITS AND ACCESSORIES • BLOWER KIT (MODELS FBK-100 AND FBK-200)
Figure 16: Wiring
Loose Knot In Power
Cord To Take Up Slack
Firebox
Floor
Model UVFRC-4228 Shown
4.
Locate the tabs (
Figure 23
). Position the blower assembly
so that the tabs (located on the cabinet base) are seated in
the notches of the blower bracket. Bend the tabs over to
secure the blower assembly (
Figure 24
).
Figure 17: Locating the Blower Installation Tabs
Locating Tabs
Cabinet Base
Model UVFRC-4228 Shown
Figure 18: Bending the Blower Installation Tabs
Bend Locating Tabs Over
(Into Notches)
Model UVFRC-4228 Shown
5.
Plug blower power cord into the junction box electrical outlet.
6.
Connect the electrical outlet and switch wires to the
power supply; 3-wire, 120 VAC, 60 Hz, 1 ph power supply
(
Figure 8
).
FBK-100 Kits
Install a field-provided ON/OFF wall switch (or P/N 85L87) in a
convenient location on a wall, near the fireplace.
FBK-200 Kits
Install the provided variable speed control (rheostat) in a
convenient location on a wall, near the fireplace.
Printed in U.S.A. © 2014 Innovative Hearth Products
P/N 750028M Rev. H 10/2014
1508 Elm Hill Pike, Suite 108
Nashville, TN 37210
IHP.us.com
Innovative Hearth Products reserves the right to make changes
at any time, without notice, in design, materials, specifications,
prices and also to discontinue colors, styles, and products.
Consult your local distributor for fireplace code information.
P750028M
