3
INNOVATIVE HEARTH PRODUCTS • MPD PRO DIRECT-VENT GAS FIREPLACES • PANEL KIT
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE REPRESENTATIVE AND ARE NOT DRAWN TO SCALE.
IHP.us.com
Figure 5
Figure 6
Figure 7: Ceramic Brick Panels Installed
INSTALLATION INSTRUCTIONS: CERAMIC BRICK PANELS
Hot Fireplace Will Cause
Severe Burns
Never Allow Children to
Touch Glass or other Fire-
place Parts
WARNING
CAUTION
INSTALL ONLY WHEN FIREPLACE IS OFF AND COLD!
1. Turn OFF the gas to the fireplace (refer to the lighting label in the
fireplace control compartment or the fireplace Installation Instruc-
tions for details).
2. Remove the glass enclosure panel (refer to the fireplace Care and
Operation Instructions for details).
3. Carefully remove the logs and place them in a secure location for
later reinstallation.
4. Pull the ember material away from the rear and side walls of the
firebox.
5. Insert the Back Panel into the firebox, and position it against the rear
firebox wall (Figure 5).
6. Carefully slide the Left Side Panel into the left side of the firebox
(Figure 5).
7. Carefully slide the Right Side Panel into the right side of the firebox
(Figure 5).
8. Place the Rear Panel into the firebox, as shown in Figure 6.
9. Carefully replace the logs; restore the ember material to its original
position; and reinstall the front glass enclosure panel (refer to the
fireplace Care and Operation Instructions or Installation Instructions
for details).
Left
Side
Panel
Right
Side
Panel
Back Panel
Rear Panel
