INNOVATIVE HEARTH PRODUCTS • MPD PRO DIRECT-VENT GAS FIREPLACES • PANEL KIT
2
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE REPRESENTATIVE AND ARE NOT DRAWN TO SCALE.
IHP.us.com
Right side shown (rear view). Left side is opposite.
Locking Hem
Back Panel
Locking
Flange
Right Side Panel
(rear face)
INSTALLATION INSTRUCTIONS: PORCELAIN PANELS
Hot Fireplace Will Cause
Severe Burns
Never Allow Children to
Touch Glass or other Fire-
place Parts
WARNING
CAUTION
INSTALL ONLY WHEN FIREPLACE IS OFF AND COLD!
1. Turn OFF the gas to the fireplace (refer to the lighting label in the
fireplace control compartment or the fireplace Installation Instruc-
tions).
2. Remove the glass enclosure panel (refer to the fireplace Care and
Operation Instructions).
3. Carefully remove the logs and place them in a secure location for
later reinstallation.
4. Pull the ember material away from the firebox rear and side walls.
5. Insert the Back Panel into the firebox, and position it against the rear
firebox wall (Figure 3).
6. Install the Right Side Panel:
a. Carefully insert the Right Side Panel into the right side of the
firebox (see Figure 3).
b. Engage the locking hem on the Side Panel with the locking flange
on the Back Panel (Figure 2).
c. Make sure the front edge of the Side Panel is flush with the front
edge of the fireplace, and then secure the panel with two (2) of
the provided screws (Figure 3).
7. Repeat Step 6 for the Left Side Panel.
8. Remove the two (2) screws in the rear of the firebox (as shown in
Figure 3), install the Rear Panel, and secure using the two removed
screws.
9. If desired, use high-temperature paint to touch up the screw heads
securing the panels.
10. [PORCELAIN PANELS ONLY]: Use non-ammoniated glass cleaner
and a soft, non-abrasive rag to remove fingerprints and smudges
from porcelain panels.
11. Carefully replace the logs; restore the ember material to its original
position; and reinstall the front glass enclosure panel (refer to the
fireplace Care and Operation Instructions or Installation Instructions).
Figure 2
Figure 3
Secure each Side Panel with two of the provided screws.
Secure the Rear Panel with the
two existing rear firebox screws.
Left
Side
Panel
Right
Side
Panel
Back Panel
Rear Panel
Figure 4: Porcelain Panels Installed