INDRA HYDRO TECH PUMPS PVT. LTD.
316, 1st Floor, 8th Cross, 4th Phase, Peenya Industrial Area, Bengaluru - 560 058, Karnataka, India
Tel.: +91 80 2836 2916, Fax: +91 80 2836 3048, Email: [email protected], www.ihpindia.in
* We reserve the right to amend specification without prior notice.
1
2
3
4
5
6
7
8
9
1. Hook with Ω shape design Non-welding method keeps material not damaged.
2. Top bearings with sand channels design, avoid shaft swing and sand damaged while operating
3. Shaft with flower shaped design(SUS 304) robustness leads superior hydraulics
4. Intermediate chamber with N-shape design, 18kg water pressure resistance to prevent
leakage.
5. Strap with HV260 hardness better intensity against pumping pressure
6. Sand flush vane design, leave the sand with the pumped liquid and prevent sand-block inside
7. Coupling with HRC 78 forged coupling increases robustness to avoid abrasion and perfectly
fitted into different types of motors
8. Suction inter connector inlet with R-angle design, 200kg tensile strength against outside
impacts.
9. Suction inter connector plate with S-shape design, 900kg tensile strength leads better
sustainability for pump.
6” Stainless Steel Borehole Pump Features
1.
Strap with HV-260 Hardness better intensity against pumping pressure
2.
Shaft with round shaped design (SUS-431-QT) robustness leads superior hydraulics
3. Impeller and guide vane with "straight line" design, increase pump in efficiency
4.
Neck ring with "inner pressure coarctation" design, special design to prevent water
backflow
5. Diffuser vane contains moving bearings with HRC50~55 leads much lower abrasion
and better lifespan
6.
Interconnector fixer with L-shaped design, tighten the s trap and interconnector and
leads strap much more stable
1
2
3
4
5
6
4” Stainless Steel Borehole Pump Features