G E T T I N G S T A R T E D
3
Vacuum assembly
Battery charging
A:
Tube Installation:
Insert tube until you hear a click.
B: Brush Installation:
Insert brush until you hear a click.
C: Battery Installation:
Slide battery up into place until you hear a click.
Check the underside to ensure that the latch is fully in place.
• Plug the power adapter into a functioning wall outlet.
• Before first use the battery may require up to 4 hours to fully charge.
• While charging, vacuum enters standby mode. Remove from charging to operate.
Charging without Wall Mount
• Connect the plug directly into the jack on the
base of the handle.
• Charging status LED’s located on top of
vacuum. Four LEDs will remain lit solid when
fully charged.
Charging with Wall Mount
(For wall mount installation, see next page)
• Connect the plug directly into the jack on
the top of the wall mount.
• Place the vacuum onto the charge mount
as seen to the right.
• Charging LED’s will turn on when the
charge contacts are properly seated.
B
A
C
