a) Depending on your location and the time of year, move the (Daylight Saving Time)
Switch
located inside the left
battery compartment on the bottom of the unit to +1 to add one hour (a DST icon will appear on the display) or to -1 to
subtract 1 hour.
b) Press and hold the
Clock Set Button
until the display flashes. Press the
Alarm Button
to toggle between 24 hour
(military) and 12 hour (standard) time display modes.
c) Press the
Hour Button
to adjust the hour setting (a PM indicator appears when time is set to PM; there is no AM
indicator)
d) Press
the
Minute Button
to adjust the minute setting. When the correct time is displayed, press the
Clock Set Button
again. Two beeps will indicate clock setting is complete.
Setting the Alarm
a) Press and hold the
Alarm Button
until the alarm time flashes to wake to iPhone/iPod (buzzer alarm sounds if no iPhone
or iPod is detected).
b) Press the
Hour Button
to set the desired alarm hour (a PM indicator appears when time is set to PM; there is no AM
indicator)
c) Press the
Minute Button
to set the alarm minute time. When the desired alarm time is displayed, press the
Alarm
Button
again. Two beeps will indicate alarm setting is complete. Alarm is now armed, indicated by the alarm clock icon.
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)
Press the
Alarm Button
to arm or disarm alarm functions. When armed, the alarm icon appears in the display.
Resetting the Alarm to Come on the Next Day
When the alarm is sounding, press the
OFF/reset Button
to stop the alarm and reset it to come on the following day.
Snooze
Press the
Snooze Button
after the alarm sounds. The alarm will be silenced and come on again 9 minutes later. Snooze
can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The iP28 has a sure alarm feature: if the backup battery is installed, the buzzer alarm will still sound in the event of power
failure.
Setting the Clock
Using the Alarm
Using the iP28
5
