USING THE USB DOCK
1. Connect your already playing iPhone/iPod to the USB dock on back
of unit using that cable that came with your device. The unit will
automatically turn on and you will hear the music playing from your
iPhone/iPod. The iPhone/iPod Icon will appear at the right side of the
display, indicating iPhone/iPod playing mode.
2. Press the or
Buttons
on the unit to adjust the system volume.
Note:
If the volume is too low on the iPhone/iPod, the unit may not detect
that the iPhone/iPod is in play mode. Press the
USB Button
to play it.
Press again as needed to pause and resume play.
3 Press the
+
or
–
Buttons
to go to the next or previous track (hold to scan
backwards or forwards within a track).
4. Press the
Power Button
to turn off the unit. You can also turn the
unit off by disconnecting a device playing through the USB dock.
NOTE: Press the
Mode Button
to cycle from iPod (Lightning dock) to
USB to FM radio modes.
LISTENING TO FM RADIO
Tuning and Playing the Radio
1. Press and release the
Power Button
to turn on the unit, then press and
release the
Mode Button
as needed to cycle through dock, USB, and FM
radio modes.
2. When FM mode is selected, press the
+
or
–
Buttons
to tune the radio to a
desired station. The current radio frequency appears in the bottom of the
display. Press the
+
or
–
Buttons
for a few seconds to scan for the next
clear station.
3.
To memorize a station as a preset
:
A. Press the
Dock Button
as needed to step through the 6 presets
(P1 - P6) to the number you wish to assign, and then
hold
the
Dock
Button
until the selected preset number begins flashing in the display.
B. Press the
+
or
–
Buttons
to tune the radio to a desired station. Hold
briefly to have the radio autoscan/search for the next clear station.
C. Press the
Dock Button
to confirm the setting, two confirmation
beeps will confirm the setting and the preset number you wish to
assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, use the
Mode Button
to select FM mode, then
press the
Dock Button
to choose the desired preset.
5. Press the or
Button
on the unit to adjust the system volume.
USING THE UNIT IN OTHER COUNTRIES
Different regions of the world use different FM radio frequency steps and
ranges. You will need to select the one that matches the standards in your
region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is
USA; if you live in the US, you may skip this section.
1. Press and release the
Power Button
to turn on the unit, then press and
release the
Mode Button
as needed to cycle to FM radio mode.
2. Press and hold the
Mode Button
for about 5 seconds until the region
flashes in the lower part of the display and a beep sounds.
3. Press the
+
or
–
Buttons
as needed to set the display to your region: USA,
EU (Europe), JPN (Japan), AUS (Australia), or CHN (China).
2. Press and release the
Mode Button
(or no button within 10 seconds) to
exit the radio frequency setting mode. Two beeps will confirm radio
frequency setting.
S N O O Z E / D I M M E R O P E R AT I O N
1. To program a custom snooze duration, during normal operation (when
alarm is not sounding) press and hold the
Snooze/Dimmer Button
until
the display flashes, then press the
+
and
– Buttons
on the unit to adjust
the snooze time to 1 - 29 minutes.
2. Press the
Snooze/Dimmer Button
on the iPL8 after the alarm sounds.
The alarm will be silenced and will come on again in about 9 minutes
(default). You may repeat this cycle several times during the one hour
alarm cycle.
3. During normal operation (when alarm is not sounding), press the
Snooze/Dimmer Button
to control the brightness (high, medium, low
and off settings) of the LCD display.
9
8
