REVIEWING AND RESETTING THE ALARM
Press and release the
Alarm Button
at any time to review the current
alarm settings. To toggle the alarm on or off, press the
Alarm Button
as
needed. When the alarm icon is displayed, the alarm is armed/on.
Press the
Power Button
or
Alarm Button
when the alarm is sounding
to reset it to come on again at the same time the next day. Press the
Alarm Button
again to turn off/disarm the alarm. The alarm icon will
disappear.
CHARGING YOUR iPHONE OR iPOD
1. Gently dock your iPhone or iPod into the flexible Lightning dock
located on the top of the unit OR connect an iPhone or iPod to the
USB dock on back of unit using the cable that came with your
device.
While your iPhone/iPod is docked in the unit and/or connected via
the USB dock and the unit is connected to AC power, it recharges
(until fully charged). The unit will not overcharge your iPhone/iPod.
Note that non-docking iPod models will NOT charge.
Note:
Please make sure your iPhone/iPod is properly docked into the unit.
Failure to do so may damage your iPhone/iPod.
LISTENING TO YOUR iPHONE/iPOD
USING THE LIGHTNING DOCK OR USB DOCK
USING THE LIGHTNING DOCK
1. Dock your already playing iPhone/iPod. The unit will automatically
turn on and you will hear the music playing from your iPhone/iPod.
The iPhone/iPod Icon will appear at the right side of the display,
indicating iPhone/iPod playing mode.
2. Press the or
Buttons
on the unit to adjust the system volume.
Note:
If the volume is too low on the iPhone/iPod, the unit may not detect
that the iPhone/iPod is in play mode. Press the
Dock Button
to play
it. Press again as needed to pause and resume play.
3 Press the
+
or
–
Buttons
to go to the next or previous track (hold to scan
backwards or forwards within a track).
4. Press the
Power Button
to turn off the unit. You can also turn the
unit off by undocking a playing device.
NOTE: Press the
Mode Button
to cycle from iPod (Lightning dock) to
USB to FM radio modes.
7
6
S E T T I N G A N D U S I N G T H E A L A R M
SETTING THE ALARM
This unit lets you wake to your docked iPhone, iPod (iPod),
USB-connected device (USB), FM radio or to the built-in buzzer alarm.
The alarm will sound for 60 minutes or until reset/turned off.
1. Press and hold the
Alarm Button
until the alarm time display flashes
with one beep.
2. Press the
+
or
–
Buttons
to adjust the display to the desired alarm time (hold
for rapid adjustment). Remember to set the correct AM or PM alarm time.
3. Press the
Alarm Button
to confirm the alarm time. The WAKE-TO
indicator will flash on the display. Press the
+
or
–
Buttons
to toggle
among wake to Lightning dock, USB, FM radio or buzzer, then press
the
Alarm Button
to access volume setting for the selected alarm
source.
Wake to iPod:
If wake to dock (iPod) is selected, press the
+
or
–
Buttons
to set the Lightning dock volume (can be set
from 5- 40). The alarm will wake you to the last track
played on your docked iPhone or iPod.
Wake to USB:
If wake to USB is selected, press the
+
or
–
Buttons
to set
the USB dock volume (can be set from 5- 40). The alarm
will wake you to the last track played on the iPhone or
iPod connected to the USB dock.
Wake to radio:
If wake to FM is selected, press the
+
or
–
Buttons
to
select a radio station to wake to, then confirm your
selection by pressing the
Alarm Button
. Press the
+
or
–
Buttons
to set the FM radio alarm volume (can be set
from 5- 40).
Wake to Buzzer:
If wake to Buzzer is selected, press the
+
or
–
Buttons
to
choose HI or LO buzzer alarm volume.
4. Press the
Alarm Button
to exit and confirm alarm settings. An alarm
icon will appear on the display, indicating that the alarm is set and armed.
