iHome iHome iPL8 Operation Instructions Manual Download Page 6

5

SETTING THE TIME:
TIME SYNC & MANUAL
TIME SETTING

TIME SYNC

This unit is equipped with auto sync. By default, the unit will sync to the 

time on your iPhone or newer iPod (iPod touch, iPod nano and iPod 

Classic; older iPod models such as iPod mini do not support this feature)  

whenever you dock it in the Lightning dock OR connect via the USB port 

located on back of the unit.  During time sync, “SYNC” will flash on the 

display, indicating attempted time sync.  When successful, the updated 

time will appear on the display.  If sync is unsuccessful, try to sync again 

using  a different iPhone or iPod. If sync still doesn’t work, set the time 

manually (see below).

SETTING THE TIME MANUALLY

1.  Press and hold the 

Time Set Button

 until “MAN” or “SYNC” flashes in the 

display with one beep. If “SYNC” is displayed, press the 

+

 or 

 

Buttons

 so 

“MAN” appears in the display, indicating manual time setting mode.

2.   Press and release the 

Time Set Button

. The time will flash in the display.

3.  Press the 

+

 or 

 

Buttons

 to set the correct time (hold for rapid adjustment. 

Make sure you are setting the time to the correct AM or PM time. The PM 

indicator appears at the upper left of the display; there is no AM indicator.  

NOTE

: The time can be set to standard 12 hour time (AM and PM) or to 24 

hour time (sometimes called “military time”). To toggle between 12 and 24 

modes, press and release the     

Alarm Button

 located on top of the unit at 

any time during manual time setting mode.

4.  Press and release the 

Time Set Button

 to confirm the current time setting 

(two beeps will sound) and exit time setting mode. 

4

B A C K U P   B A T T E R Y   ( C O N T I N U E D )

1.  Please make sure the AC adaptor is connected. Otherwise all settings 

may be lost during battery replacement.

2.  Use a Phillips screwdriver to open the backup battery compartment 

door located on the bottom of the unit.

3.  Remove the exhausted battery. Insert a 

new CR2450 battery by easing it under the 

tabs in the battery well and pressing down. 

Make sure the side is facing up. 

4.  Close the battery compartment door and 

tighten the battery door screw.

 

Note: Make sure you dispose of battery 

properly (see your local regulations).

WARNING: Lithium batteries can explode or cause burns if disassembled, 

shorted, recharged, exposed to water, fire, or high temperatures. Do not 

place loose batteries in a pocket, purse, or other container containing metal 

objects, mix with used or other battery types, or store with hazardous or 

combustible materials.  Store in cool, dry, ventilated area. Follow applicable 

laws and regulations for transport and disposal.

Summary of Contents for iHome iPL8
















Reviews: