background image

T R O U B L E S H O O T I N G

Symptom

Possible reason

Solution

Unit won’t turn on

Device does not 
respond to the 
unit and/or
device is playing 
but no sound 
comes out 

AC adaptor isn't plugged 
into a working wall socket 
or not plugged into the 
power jack on back of the 
unit

Unit is not properly 
connected to power 
source an/or Power 
Button is not ON

Plug the AC adaptor into a 
working wall socket and plug the 
connector into the supply jack on 
the unit. Make sure any associated 
wall switch that controls the outlet 
the is ON.

Make sure the unit is properly 
connected to AC power source. 
Check that the Power Button is lit 
up, indicating the unit is ON.  Try 
adjusting volume on unit and 
audio device

Erratic 
performance

No sound

Sound distorted  

Device doesn’t 
charge up

External interference

Volume is too low

Volume is too high

Sound source is distorted

Unit is not properly 
connected to AC power

Move unit away from potential 
sources of external interference such 
as computers, modems, wireless 
devices (routers) or fluorescent light.

Turn volume up on your device

Turn volume down on your device

If  the original sound file (MP3) is old 
or of poor quality, distortion and noise 
are easily noticed with high-power 
speakers. Try upgrading file from a 
trusted source such as iTunes.

Please make sure the unit is 
connected to a working power outlet. 
The unit will not charge while 
operating on backup battery

9

S N O O Z E / D I M M E R   O P E R AT I O N

1.  To program a custom  snooze duration, during normal operation (when 

alarm is not sounding) press and hold the 

Snooze/Dimmer Button

 until 

the display flashes, then press the 

+

 and 

– Buttons

 on the unit to adjust 

the snooze time to 1 - 29 minutes.

2. Press the 

Snooze/Dimmer Button

 on the iP10 after the alarm sounds. 

The alarm will be silenced and will come on again in about 9 minutes 
(default). You may repeat this cycle several times during the one hour 
alarm cycle.

 
3.  During normal operation (when alarm is not sounding), press the 

Snooze/Dimmer Button

 to control the brightness (high, medium, low 

and off settings) of the LCD display.

S L E E P   M O D E

Sleep mode lets you sleep to your docked and playing iPhone or iPod 
Press the 

Sleep Button

 as needed to cycle to the desired sleep duration: 

120, 90, 60, 30 or 15 minutes or OFF (turns sleep mode off). Press the         

Volume Buttons

 on the unit to adjust sleep listening level. The unit will 

revert to normal volume level when sleep mode ends. Press the 

Sleep 

Button

 during sleep to view the remaining sleep time; press again to set 

sleep to next (lower) sleep duration.

M A I N T E N A N C E

•  Place the unit on a level surface away from sources of direct sunlight or 

excessive heat.

•  Protect your furniture when placing your unit on a natural wood and 

lacquered finish. A cloth or other protective material should be placed 
between it and the furniture.

•  Clean your unit with a soft cloth moistened only with mild soap and water. 

Stronger cleaning agents, such as Benzene, thinner or similar materials can 
damage the surface of the unit.

8

Summary of Contents for iHome iP10














Reviews: