background image

Setting up the Unit

to Operate on Power

For easy access to the DC jack, make sure slide 

cover is closed.
1.  Connect the included AC adaptor to the    

DC Jack on the back of the unit. 

2.  Connect the plug to a working outlet.

Setting up the Unit

to Operate on Batteries

The  unit  operates  on  4  AA  batteries  for 

portable use. When the sound becomes weak 

or  distorted,  it’s  time  to  replace  the  batteries 

with fresh ones.

1.  Turn the unit over and slide open the battery 

compartment door located on the bottom of 

the unit.

2.  Insert 4 AA batteries as shown, making 

sure to match the polarity (+ or -) to the 

diagram inside the battery compartment.

3.  Close the battery compartment.

NOTE: When the unit is connected to a 

power source, it will charge a docked iPad 

iPhone or iPod and/or an iOS device 

connected to the USB port. It will not charge 

while operating on batteries. USB port will 

NOT charge iPad models. 

iHome+Apps do 

not work while unit is operating on batter-

ies.

3

Make sure to dispose of batteries

according to local regulations.

Aux

in

DC     12V 

2.7A

RESETRES

ET

TESTTE

ST

Summary of Contents for iDN55











Reviews: