Using Bluetooth: Pairing Your Device
NOTE
: See the iDM11 Bluetooth Connection Guide for complete pairing details.
1. Move the
Travel Lock/Aux/Bluetooth Switch
on the back of the speaker to the Bluetooth
position (right).
2. Press and hold the
Button
to turn on the unit (release when a light appears on the base).
3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
4.
Press and hold
the
Bluetooth/Speakerphone Button
on the unit until the base flashes red
and blue alternately and the unit beeps twice to indicate pairing attempt. The lights will
flash while the unit attempts to pair. If your device asks for a password, enter
1234
on
the keyboard of your device.If no device is paired within 2 minutes, the base will glow
red for 2 seconds accompanied by a long beep and the unit will power off. If this occurs,
retry steps 2-4.
5. Once paired with a device, a blue light will glow steadily and two beeps will confirm that
pairing is complete. There should also be an indication on your device that pairing is
complete. On some devices, you must then select “use as a stereo audio device” or
similiar on the device’s Bluetooth menu. Once paired, your device should link to the
iDM11 whenever within range.
P8
4
