P10
6
1. Move the
Travel Lock/Aux/Bluetooth Switch
to the Aux position to listen to audio via aux line-in.
2. Connect the micro USB plug to the micro USB charging port on the back of the speaker and
connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device.
4. Press and hold the
Button
to turn on the unit (release when blue light appears).
5. Use the
/
- Buttons
to adjust volume. You may wish to adjust the volume on your audio
device,
too.
6. When done listening, press and release the
Button
to turn the unit off. Remember to turn off
your audio device, too.
Playing Audio via Aux
Unit doesn’t respond (no power)
• Make sure unit is completely charged. Check that all connections are correct and properly plugged
in. Make sure your device is properly paired with the iDM11.
• Make sure the
Travel Lock/Aux/Bluetooth Switch
is not in the
position, as this will disable
operation.
Resetting the unit
If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so,
press and hold the
Power Button
and the
Button
simultaneously for about 3 seconds. Doing so
will restore the unit to default settings.
NOTE
: After a reset, you will need to re-pair your Bluetooth device(s).
Trouble pairing device/computer with iDM11
Bluetooth implementation varies depending on your computer’s hardware and operating system. Please
see our website for updates on pairing.
• Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth
pairing and linking.
For further information and to see the latest instructions,visit
www.ihomeaudio.com/support
Troubleshooting
