background image

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from 

defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. 

Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, 

SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $10.00 charge for handling, 

packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this 

product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee 

for service without proof of purchase is $35.00.

Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective 

batteries are the most common cause of problems encountered.

If service is still required:

1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.

2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.

3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00 ($35.00 without proof of purchase).

4. Send the unit prepaid and insured, to the Factory Service Center listed below.

Consumer Repair Department

SDI Technologies Inc.

1330 Goodyear Drive

El Paso, TX 79936-6420

Disclaimer of Warranty

NOTE:

 This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which 

have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized 

persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape 

cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original 

purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members 

or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or 

punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these 

restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from 

state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually 

binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies 

product.

© 2011 SDI Technologies, Inc. All rights reserved

Questions? Visit www.ihomeaudio.com or call 1-800-288-2792 Toll Free.

Limited 90 Day Warranty

iDM11-111511-A    

                                          

Printed in China

P12

Summary of Contents for iDM11













Reviews: