Unit does not turn on
AC adaptor isn't plugged into a working wall
socket or not plugged into the power supply
jack on back of the unit
Plug the AC adaptor into a working wall socket and plug the connector
into the supply jack on the unit
Unit requires a reset
If unit is plugged in and doesn't respond, try resetting the unit by
following these steps:
a) remove iPad/iPhone/iPod from dock
b) unplug unit from power source
c) remove back up batteries
d) wait a few minutes, then restore batteries and resume use
iPad/iPhone/iPod is not docked/connected
properly
Remove your iPhone/iPod from the dock and check for obstruction on the
connectors in the dock and on your iPad/iPhone/iPod. Then reseat it in
the dock. Try removing case from device before docking.
Battery Low icon
always flashing
Batteries are weak
Replace with new battery
Batteries were not installed properly
Check to make sure the +/- polarity is correct
iPad/iPhone/iPod does
not respond to the
unit, iPad/iPhone/iPod
is playing but no
sound comes out
iPad/iPhone/iPod is not docked properly
Remove your iPhone/iPod from the dock and check for obstruction on
the connectors in the dock and on your iPhone/iPod. Then reseat it in the
dock. Try removing included rubber docking insert before docking.
Your iPad/iPhone/iPod software is out of date
Upgrade software on your iPad/iPhone/iPod via iTunes on your
computer
iPad/iPhone/iPod is locked up/plays but no
sound comes out
Check the volume setting. Make sure your iPad/iPhone/iPod is working
properly before docking into the unit. Please refer to your iPad/iPhone/iPod
manual for details. See above for software upgrade information.
You may need to reset your iPad/iPhone/iPod. Refer to your iPad, iPhone
or iPod user guide for details on how to perform a reset.
Using non-touch screen iPod
Unit cannot control those iPod models.
iPad/iPhone/iPod
didn’t charge up
iPad/iPhone/iPod is locked up/ frozen
iPad/iPhone/iPod battery has problem
Please make sure your iPad/iPhone/iPod is working properly before
docking into the unit. Please refer to your iPad/iPhone/iPod manual for
details.
Time sync didn’t work
Older iPod models may not support time sync
function
Time sync is turned off.
Make sure you are using an iPhone or newer iPod such as touch. If
not available, set time manually (see page 3).
Press and hold the Time Sync Button. If AUTO SYNC OFF appears
on the display, press + or - Button to toggle setting to AUTO SYNC
ON. Allow clock setting mode to time out.
9
Troubleshooting
Solution
Symptom
Possible Problem
No sound from unit
Volume is set too low on unit
Make sure volume is turned up
Move unit away from potential sources of external interference such as
computers, modems, wireless devices (routers) or fluorescent light.
Unit/iPad/iPhone/iPod
performance is erratic
The unit is reacting to external interference
Unit doesn’t respond
iPad/iPhone/iPod is not docked properly
Remove your iPad/iPhone/iPod from the dock and check for obstruction
on the connectors in the dock and on your iPad/iPhone/iPod. Then reseat
it in the dock. Try removing included rubber docking insert.
