background image

6

Using the iD84

Snooze Operation

1. To program a custom snooze time, press and hold the 

Snooze Button

 during normal operation (when alarm is not 

sounding) until the snooze minutes display appears. Press the 

or

 - Button

 to set the snooze timer from 1 to 29

minutes. Press the 

Snooze/Dimmer Button 

to exit snooze setting mode

.

2. Press the 

Snooze/Dimmer Button

 after an alarm sounds. The alarm will be silenced for the set snooze duration time 

then sound again. Snooze can be pressed several times during the 1 hour alarm cycle.

Sure Alarm

The iD84 has a sure alarm feature. If back-up batteries are installed, the buzzer alarm will still sound in the event of a 
power failure.

Tip: Download the free iHome+Sleep app for advanced alarm, snooze and sleep functions

Charging your iPad/iPhone/Pod

1. Gently dock your iPad, iPhone or iPod. While an iPad/iPhone/iPod is docked in the unit and the unit is connected to AC 

power, it recharges (until fully charged). NOTE: iPod Classic (1G and 2G) will not charge.

Listening to iPad/iPhone/iPod

1. Dock the already playing iPad/iPhone/iPod in Dock. The iD84 will automatically turn on and you will hear the music 

playing from your iPhone/iPod.

 

Note:

 If the playing song volume is too low on the iPad/iPhone/iPod, the iD84 may not detect iPod is in play mode. 

Press the  

     Button

 to play it. 

2. When an iPhone/iPod is docked and in standby mode, press the 

      Button

 to play it. “iPod”  will appear on the display 

to indicate iPod playing mode.

3. Press the 

     Button

 again to pause play; press again to resume it.

4.  Press the 

or

 - Button

 to skip to the next or previous track on your iPad/iPhone/iPod. Press and hold the 

or

 - Button

 

to search within a track.

5. Press the      or      to adjust the system volume. 
6. Press  the 

EQ Button

 as needed to select Treble, Bass, Balance or 3D Sound, then press the 

or

 - Button

 to adjust 

settings . 

7. To turn off the unit, press the     

 Button

. An iPad/iPhone/iPod will continue charging while docked.

Listening to Radio

Setting up Antenna

Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
For USA user, snap AM antenna cable into 

AM Loop Antenna Socket

 on back of unit and snap antenna into the antenna 

stand. Move antenna 12” away from unit for best reception. 

Tuning and Playing the Radio

1. Press the 

Mode Button

 as needed to turn on the iD84 and cycle through iPod, FM radio, AM radio and Line-in modes.

2. When the desired FM or AM mode is selected, press the 

or

 - Button

 to tune the radio to a desired station. The current 

radio frequency appears in the lower right of the display.  Press the 

or

 - Button

 for a few seconds to scan for the next 

clear station.

Summary of Contents for iD84















Reviews: