background image

When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety.  However, improper use can result in potential 

electrical shock or fire hazards. Please read and follow all safety and operating instructions carefully before installation and use, and keep these instructions 

handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 
1.   

Water and Moisture

 – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a 

wet basement. 

2.   

Ventilation

 – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated 

on a bed, sofa, rug or similar surface that may block ventilation openings.  Also, it should not be placed in a built-in installation, such as a bookcase or 

cabinet, which may impede the flow of air through the ventilation openings.

3.   

Heat

 – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

4.   

Power Sources

 – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 

Only use the AC adapter that came with the unit.

5.   

Power-Cable Protection

 – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against 

them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.

6.   

Cleaning

 – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.  

7.  

Objects and Liquid Entry

 – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.

8.  

Attachments

 – Do not use attachments not recommended by the product manufacturer.

9.   L

ightning and Power Surge Protection

 – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or 

when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.

10. 

Overloading

 – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

11. 

Damage Requiring Service

 – The unit should be serviced by qualified service personnel when:

 

A.  the power supply cable or plug has been damaged.

 

B.  objects have fallen into or liquid has been spilled into the enclosure.

 

C.  the unit has been exposed to rain.

 

D.  the unit has been dropped or the enclosure damaged.

 

E.  the unit exhibits a marked change in performance or does not operate normally.

12. 

Periods of Nonuse

 – If the unit is to be left unused for an extended period of time, such as a month or longer, the backup battery should be removed 

from the unit to prevent damage or corrosion.

13. 

Servicing

 – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions.  Service methods not 

covered in the operating instructions should be referred to qualified service personnel.

14.  CAUTION – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

15.  Do not dispose of batteries in the household trash or fire.

16. 

WARNING: Do not ingest the battery.  Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is 

swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

 

Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from 

children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

13

Consumer Product Safety Guide

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for iBTW39

















Reviews: