6
Setting the Time
1.
Press and hold
the
Time Set/Sleep
Button for 2 seconds. “CLOCK” will appear in the bottom of the display, the time will
flash and a beep will sound. Press the
–
or
+
Button to set the correct time (press and hold for rapid setting). Remember
to set the correct AM or PM time. The AM and PM Indicators are located to the left of the time digits.
2. Press the
Time Set/Sleep
Button. The year will flash. Press the
–
or
+
Button to set the correct year.
3. Press the
Time Set/Sleep
Button again. The date will flash. Press the
–
or
+
Button to set the correct date (press and
hold for rapid setting).
4. Press the
Time Set/Sleep
Button again. “DST ON” will appear in the bottom of the display. DST ON indicates the unit is
in automatic Daylight Saving Time adjust mode and will automatically adjust the time at the start and end of Daylight
Saving Time in March and November. Press the
–
or
+
Button to set unit to “DST OFF” if you are in a location that does
not observe Daylight Saving Time.
TIP:
Press either the or Button when display is flashing during clock setting to toggle the display between 24 hour (military)
and 12 hour (standard) display mode. The AM/PM indicators will not appear when display is in 24 hour mode.
5. Press the
Time Set/Sleep
Button again (or no button press within 10 seconds) to exit the clock setting mode. 2 beeps will
confirm clock setting is complete.
Setting and Using the Alarm
This unit has a dual alarm system so you can set two separate alarms to different alarm times and wake to sources.
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for whichever alarm
you are setting.
1. Press and hold the or Button until the alarm icon flashes, the alarm time flashes on the lower part of the display and
a beep sounds. Press and release the
–
or
+
Button to set the alarm time (press and hold for faster setting). Remember to
set the correct AM or PM time.
2. Press and release the Alarm Button again to confirm the set alarm time. The current wake schedule will flash. Press and
release the
–
or
+
Button as needed to select “7 DAYS” (alarm sounds every day), “5 DAYS” (alarm sounds on week
days) or “2 DAYS” (alarm sounds only on weekends).
Using the
iBT290
