Using the Unit in Other Countries
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches the
standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA; if you live in the US, you
may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the
Mode
Button for about 5 seconds until
“USA” appears in the lower part of display and 1 beep sounds. Press and release the
–
or
+
Button to select your region.
2. Press and release the Mode Button again (or no button within 10 seconds) to exit the radio frequency setting mode. Two
beeps will confirm radio frequency setting.
Color Change Mode
Color Change Mode
can be accessed whether the unit is ON or OFF. There are 4 color settings. Press the
Color
Button to cycle through them. The settings are:
• FADE
Slow color change (default): Colors slowly fade in and out continually from one color to the next.
• FAST
Fast color change: colors change quickly from one to another through the color spectrum.
• 1 COLOR Select the last color.
NOTE: To manually cycle to a desired color, press and release the
– or + Button as needed while the unit is OFF (this function is not available while the unit is ON).
• NONE Turns off cabinet color effect.
Dimmer Mode
When unit is in normal mode (no alarm is sounding), press the
Snooze/Dimmer
Button to cycle through display
brightness settings, including OFF. Settings affect both the display backlight and cabinet LED.
Bedtime Sleep Mode
This unit has a
Bedtime Sleep
feature which gradually lowers the volume of playing audio over a set time then turns off.
1. Press and release the
Time Set/Sleep
Button as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or
Off (cancels sleep mode and turns unit off).
2. To set sleep volume, press the or Buttons. Sleep volume does not effect normal or alarm volume settings.
3. During sleep mode, press the
Time Set/Sleep
Button to view the sleep time remaining. Press again to set sleep to the next lowest
setting.
4. To cancel sleep mode and turn the unit off, press and release the Button at any time during sleep mode.
9
Using the
iBT290
