background image

P9

iBN6

Using the

Charging the Unit

1. 

To charge the internal battery for portable operation, 

connect the included AC adaptor to the DC jack located on 
the side of the unit and connect the other end to a working 
wall outlet. While charging, the Battery Charge Indicator 
light on the front of the unit will glow solid red. Once fully 
charged the light will glow solid green.

 

For first time use, make sure to fully charge the internal 

battery for about 8 hours. 

Charging and Battery Status

  While operating on the internal battery, when the unit is ON 

the Battery/Charging Status Indicator light on the front of the 
unit automatically appears every 5 minutes.

ECO Battery Mode

  ECO Battery Mode allows for extended battery life when 

playing unit for up to 14 hours without charging. In ECO 

mode, the volume level decreases slightly as the battery 

discharges. Set 

Eco Battery Mode Switch

 to 

On

 for Eco 

Mode. Set to 

Off

 for normal listening. 

Note

: The ECO 

switch is disabled while the unit is operating on AC adaptor.

   The switch position has no effect on the battery charging.

Battery Charge Status Indicator

USB 

Charge

Flashing Red

LOW needs charging

X

MED partially charged

HIGH fully charged

Fading Red

Fading Green

 

TIP

To check battery status at any time

 

(whether unit is on or off, operating on 

battery 

or

 AC power), press and hold both 

the 

 Button

 or 

+ Button

 at the same time 

for 2 seconds.

outlet

5V 3A

on            off

reset

eco

usb out  

1A

 

DC 5V/3A

5

Summary of Contents for iBN6



















Reviews: