P17
Unit doesn’t respond (no power)
• Check that all connections are correct and properly plugged in.
• For internal battery operation, make sure the unit is fully charged.
• Make sure your device is properly paired with the iBN6.
• Make sure the
Power
is ON.
Unit doesn’t respond
• If the unit appears to be “frozen” or locked up or hasn’t been used in a long time, you may need to
reset it. To do so, use a straightened paper-clip, toothpick, or similar device to press the reset button
located under the water resistant gasket on the side of the unit. The blue LED indicator on the front of the
unit will flash rapidly 5 times to indicate the unit has been reset. If unit hasn’t been used in a long time,
charge unit for a number of hours before attempting to reset.
Trouble pairing device with iBN6
Bluetooth implementation varies depending on your device’s hardware and operating system. Please see
our website for updates on pairing.
• If auto “Pair and play” on your NFC–enabled device fails, make sure Bluetooth is turned on and screen
is active (not dark) on NFC device. If pairing still fails, try to pair manually by powering on the unit then
pressing and holding the Pairing Button on the top of the unit for 2 seconds.
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing
and linking.
For further information and to see the latest instructions, visit
www.ihome.com/support
Troubleshooting
13
