P10
iBN6
Using the
Using Bluetooth: Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Manually”.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability as described in the
device’s user manual.
2. Place your NFC–enabled device in play mode.
3. Touch the area of your playing NFC device against the antenna area on top of the iBN6. The
iBN6 will turn on and enter automatic pairing mode, a tone will sound and the light will flash blue while
the unit attempts to pair.
“iHome iBN6” should appear on your device’s menu. If your device asks if you
wish to pair, accept (select “Yes” or similar). Once paired with a device, the blue indicator light will glow
steadily, a confirmation tone will sound and your music will play through the unit.
4. Press the
Button
to play or pause audio.
5. Press the
Button
to go to the start of a track, press twice to play the previous track. Press the Button
to advance to the next track.
Press and hold
or for rapid search backwards or forwards within
a track.
6. Press the
– Button
or
+ Button
to adjust the volume on the unit. Press and hold for rapid volume change.
The LED indicator on the front of the unit will flash 3X when the volume is at maximum OR minimum. You
can also adjust volume on your device.
7. When done listening, press the
Power Button
to turn the unit OFF. Remember to turn off your audio
device, too.
NOTE
: To disconnect your device, simply touch it again on the antenna area on top of the unit.
To pair
a device manually, please see the following “Pairing Your Device Manually” section.
6
