background image

Using the iA100

5

P8

Connecting the iA100 to Power Source

Please read rating label at the bottom of system for power input and other safety information.

Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC cord of the AC adaptor 
into the wall outlet.

Turning the iA100 ON or OFF

Press the  

Power/App Button

 on the iA100 at any time to turn the iA100 On or Off. Note that a docked iPad, iPhone or 

iPod will continue to charge when the unit is turned off as long as the AC adaptor is plugged in. iPod Classic (1G and 2G) 
will not charge.

Time Sync

 

The iA100 Time Sync feature allows you to sync the time setting on the iA100 to the time from your iPad, iPhone or recent 
model iPod (iPod touch, iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature).

1. Press the 

Clock Button

 located at the back of the unit, “Time Sync” flashes on the lower part of the display. 

2. Once sync is completed, “Time Updated” will appear on the display. 

3. If sync was not successful, “Sync Failed” will appear on the display. If this happens, please try again, with a different 

iPad/iPhone/iPod if needed. If sync still fails, please see Setting Time and Calendar below to set the clock.

NOTE: 

iPhone time is automatically updated to the correct time via cell phone towers. The time on your iPad or iPod is 

accurate only to the time on the computer the last time the iPad or iPod was synced to it. It’s possible to have up to 59 
seconds difference between the  iA100 and synced iPhone/iPod.

Setting Time and Calendar Manually

1. Press and hold the 

Clock Button

 located on the back of the unit until the time display flashes. 

2. Press the 

 or 

 Button

 to adjust the time (hold for a few seconds to advance or reverse rapidly). Remember to set 

the correct AM or PM hour. An icon in the upper left hand corner of the time display indicates AM or PM 

3. Press the 

Clock Button

 again. The  year will flash in the lower part of the display.  Press the 

 or 

Button

 until the 

current year is displayed.

4. Press the 

Clock Button

 again. The month and date will flash. Press the 

 or 

Button

 until the current month  and 

date is displayed. Hold to advance rapidly.

5. Press the 

Clock Button

 once more. Two beeps will sound to confirm your settings and you will exit Time and Calendar 

Setting mode.

Summary of Contents for IA100


















Reviews: