3
HiP99 display
Setting Up the HiP99
Attach Rear Cover After Staff Adjusts These Control Settings and Functions:
Access to the power supply jack, time zone and clock and calendar settings and room volume is on the rear of the unit.
Attach the rear cover using the thumbscrew once these settings are complete to prevent tampering. Remove cover for any
future adjustments and reattach once adjustments are completed..
Connect HiP99 to Power Source
Plug the AC adaptor cable into the
AC Adaptor Jack
and the other end into a standard 120 VAC wall socket. Adaptor
must be plugged in to operate.
The HiP99 does not operate on batteries.
Setting the Clock Time
This unit is a
PRESET Clock/Radio;
the clock is already preset at the factory. You just need to set the time zone for your
location.
1. Depending on your location and whether or not Daylight Saving Time (DST) is in effect, set the
DST Switch
located on
the back of the unit to +1 to add an hour or to -1 to subtract an hour or use the AUTO setting.
2. Set the
DST Switch
to AUTO to have the unit automatically adjust the time at the beginning and end of Daylight Saving
Time each year.
3. Press and hold the
Time Zone Button
located on the back of the unit. The Time Zone Indicator at the lower part of the
display flashes the current time zone. Turn the
Set Wheel
to select your time zone.
4. Press
Time Zone Button
again (or no button within 10 seconds) to exit the setting mode.
5. If the time showing is not correct, please see
Setting Time and Calendar
to set the clock.
Setting Time and Calendar
1. Press and hold the
Clock Adjust Button
located on the back of the unit until the time blinks on the display.
Turn
the
Set Wheel
to adjust to correct time. Remember to set the correct
AM
or
PM
time
.
2. Press the
Clock Adjust Button
again. The year will blink. Turn the
Set Wheel
until the current year is displayed.
3. Press the
Clock Adjust Button
again to adjust month and date. Turn the
Set Wheel
until the current month/date is
displayed.
4. Press the
Clock Adjust Button
again (or no button within 10 seconds) to exit the setting mode.
Room Volume
1. Slide the
Volume Switch
located on the back of the unit to High for large rooms or to Low for smaller rooms.
Alarm Indicator
iPod Indicator
Time Display
Battery Low Indicator
DST Indicator
AM/PM Indicator
Wake to Indicator:
iPod, Radio, Buzzer
Radio Frequency / Alarm Time Display
Alarm Time AM/PM Indicator
FM Indicator