IHI Shibaura SR525HP-S, Operator'S Manual

Page: 135 / 154

53
[Cautions for handling]
● Check the oil level before the engine is
started or when cold.
● Stop the machine on a horizontal surface and
check the oil level at a horizontal condition.
● Never flow the exhaust oil to a river or
sewage. Have a specialized dealer dispose
of the exhaust oil or take some other proper
means.
Changing the oil
Drain oil from the drain plug under the engine.
After the oil is completely drained, tighten the
drain plug and supply new oil from the oil inlet.
②
HST oil
Change the HST oil every 300 hours.
Inspection
Lower the implement and check the oil level on
the level gauge in the hydraulic tank (right side).
If the oil level is below the center line, supply oil
from the oil filler port up to the specified line (1/2
to 2/3 on the level gauge).
Removing the oil filler cap
Open the rear cover and front cover. By
loosening the bolt fixing the upper cover of the
hydraulic tank, the cover can be removed. After
supplying the oil, retighten the bolt.
Changing the oil
Drain the oil from the drain plug under the
hydraulic oil tank. Oil can be drained smoothly if
it is drained while still warm. (Be careful if the oil
is hot.)
After the oil is completely drained, tighten the
drain plug and supply new oil from the oil filler
port.
Drain plug
Level gauge
56