iHealth Track, User Manual, Page: 10 / 125

Please visit the support section of the www.ihealthlabs.eu website to see our comprehensive Frequently
Asked Questions on blood pressure.
9. GENERAL SAFETY AND PRECAUTIONS
1. Carefully read the user guide before operating the device.
2. Consult your physician for any of the following situations:
a) The application of the cuff over a wound or inflamed area.
b) The application of the cuff on the arm on the side of a mastectomy.
c) Simultaneous use with other medical monitoring equipment on the same limb.
d) The application of the cuff on any limb with intravascular access or therapy, or an arteriovenous (A-V)
shunt.
e) The blood circulation of the user needs to be checked.
3. Do not use this product in a moving vehicle as this may result in inaccurate measurements.
4. The IHB symbol will be displayed under 2 sets of circumstances:
a) The coefficient of variation (CV) of pulse period >25%.
b) The difference of adjacent pulse period is ≥0.14s and more than 53% of the total number of pulses
readings falls within this definition.
5. Please do not use any cuff other than that supplied by the manufacturer as this may result in inaccurate
measurements.
6. The monitor will show 'HI' or 'Lo' as technical alarm on LCD with no delay if the determined blood
pressure (systolic or diastolic) is outside the rated range specified in part SPECIFICATIONS. In this case, you
should consult a physician or check if your operation violated the instructions. The technical alarm
condition (outside the rated range) is pre-set in the factory and cannot be adjusted or inactivated. This
alarm condition is assigned as low priority according to IEC 60601-1-8. The technical alarm is non-latching
and needs no reset. The signal displayed on LCD will disappear automatically after about 8 seconds.
This Monitor is designed for adults and should never be used on infants, young children or patients
10