Installation
Operating Instructions of the dryve D3 V0.0
6/15
3
Installation
3.1
Mechanical installation
WARNING!
•
Danger of malfunction
•
Fire hazard
•
Explosion hazard
Never operate the dryve D3 motor control system in water or in an aggressive, flammable or explosive atmosphere. Always
pay attention to the
Environmental conditions
-
Installation in a switch cabinet can be done on a TS 35 support rail (EN 50022) by mounting on the separately available
angle adapter.
-
The installation site must be free of extreme vibrations or shocks.
-
The dimensions for adjacent components can be found in the drawing at
Dimensions
-
The heated air flow of other devices and components must not be led through the area of the dryve D3.
-
MTTF VALUE
3.2
Electrical installation
WARNING!
•
Risk of injury
Make sure that an emergency shutdown can be performed at all times.
CAUTION!
•
Danger of electrical voltage
•
Danger of electric arcs
Always turn off the power before disconnecting or making electrical connections in the system. Secure the power supply
against restart.
After switching off, wait at least 5 minutes until further work is carried out.
Check the absence of voltage before working on the system.
Danger of improperly mounted electrical connections.
Do not allow cables to be unmounted and ensure that all connections are secure.
CAUTION!
•
Electromagnetic alternating fields
Electromagnetic fields around the live wires may cause interference. Lay the supply and motor cables separately from the
control cables. Use the shortest possible cable lengths. Follow the instructions for
Electromagnetic compatibility
NOTE
An operating voltage above the voltage specified in the technical data, as well as the swapping of the connections will de-
stroy the dryve D3 motor control. system.
Select an operating voltage within the voltage range specified in the technical data.
