Regulatory Information
This product has been tested and was found to comply with the following standards:
· FCC PART 15, SUBPART B, Class B - Unintentional Radiators.
· Industry Canada ICES-003, Issue 6, Class B - Information Technology Equipment.
· CISPR 11:2009 + A1:2010 / EN 55011:2009 +A1:2010, Class B - Industrial, Scientific and Medical Equipment.
· EN 61326-1:2013 – Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements, Part 1:
General Requirements.
This product includes a laser scanner which is a Class 1 laser product and complies with IEC 60825-1 2007-03 Ed. 2.0 and
21 CFR Subchapter J Parts 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24,
2007.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The product modifications not expressly approved by Planitar could void the user's authority to operate the equipment
under FCC rules.
This product includes a Wi-Fi USB adapter that has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without RF restriction.
This product is Class B, Group 1 ISM equipment according to CISPR 11. Group 1 ISM product: A product in which there is
intentionally generated and/or used conductively coupled radio-frequency energy which is necessary for the internal
functioning of the equipment itself. Class B products are suitable for use in domestic establishments and in
establishments directly connected to a low voltage power supply network which supplies buildings used for domestic
purposes.
Contact Planitar at
or Planitar authorized distributor for product disposal information and product
take-back program.
3