Using the Operator Settings
34
4.3 Hardware Test
You can enter
[Hardware Test]
to test if all software is normally functioning or not.
❶
Enter
[Operator Settings] > [Hardware Test]
, and the screen will display as follows:
❷
To enter the sub menu, use the
[Up]
and
[Down]
buttons to move the cursor and then
press
the button to confirm.
❸
Regarding the detailed descriptions of testing all hardware in the sub menu, refer to the
following instructions.
4.3.1 I/O Test
In the page of
[I/O Test]
, you can run the testing for specific I/O application to see if it
is normally functioning. Well-sensed devices will display in red or the sensed value:
❶
Enter
[Operator Settings]
>
[Hardware Test]
>
[I/O Test]
.
❷
Enter the page of
[I/O Test]
, you can run the testing for a specific application as
explained in the chart below.
I/O applications
Testing method
Testing results
Coin
Insert coins to the coin
slot machine
Well-sensed devices will
display in red, but poorly-
sensed ones will remain in
white.
Test
Press the corresponding
button
Service
S / BOOST( )
Hardware Test