Ignition LED Colour Invader II RGBW, Manual

Page: 7 / 16

1.1.5. DMX Connection
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.
Conductor
Ground/Shield
Data (-) Signal
Data (+) Signal
7 / 16
L E D C O L O R I N V A D E R I I
in DMX output connector, you will need to use a 5 pin to 3 pin adapter.
3Pin female 5Pin male
Pin 1 Pin 1
Pin 2 Pin 2
Pin 3 Pin 3
- Pin 4 not in use
- Pin 5 not in use
L E D C O L O R I N V A D E R I I R G B W
in DMX output connector, you will need to use a 5 pin to 3 pin adapter.
Pin 4 not in use
Pin 5 not in use