1.
Open the main menu.
2.
Navigate to
‘Display Settings
è
Temperature Unit’
.
3.
Use
[UP]
and
[DOWN]
to select the
‘°C’
(degrees Celsius) or
‘°F’
(degrees Fah‐
renheit) submenu.
4.
Confirm your selection with
[ENTER]
.
ð
The desired setting is saved.
5.
To exit the menu, press
[MENU]
, or wait 30 seconds.
1.
Open the main menu.
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce
very bright light. This is also valid immediately after you turn on the
device, when the device operates in automatic mode or under remote
control and when you turn off a DMX controller that is connected to the
device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure
that nobody stays close to the device. If work has to be performed in the
area of movement or in the near vicinity of the device, it must remain
turned off.
2.
Navigate to
‘Fixture Test
è
Auto Test’
.
ð
The device immediately performs an automatic self test. The following
functions are tested: Pan, Tilt, Color, Gobos, Gobo rotation, Prism, Prism
rotation, Frost, Zoom, Focus, and Dimmer.
3.
To end the automatic self test and exit the menu, press
[MENU]
, or wait 30 sec‐
onds.
1.
Open the main menu.
2.
Navigate to
‘Fixture Test
è
Manual Mode’
.
ð
The current channel is displayed.
3.
Use
[UP]
and
[DOWN]
to select the channel for which the self test is to be per‐
formed.
Selecting the unit for the temperature
display
Performing automatic self test
Performing a manual self test
Operating
16
Gawan 200
Moving Head
