manualshive.com logo in svg

Ignition Gawan 200, User Manual

Share
Download
Ignition Gawan 200 User Manual Download Page 34

10 

Troubleshooting

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not

use ordinary microphone cables.
Never connect the DMX input or output to audio devices such as mixers

or amplifiers.

In the following we list a few common problems that may occur during operation.

We give you some suggestions for easy troubleshooting:

Symptom

Remedy

The unit does not work, no

light, the fan does not run

Check the mains connection and the main fuse.

No response to the DMX con‐

troller

1. Check the DMX connectors and cables for

proper connection.

2. Check the address settings and the DMX

polarity.

3. Try using another DMX controller.

4. Check to see if the DMX cables run near or

alongside to high voltage cables that may cause

damage or interference to DMX interface circuits.

If the procedures recommended above do not succeed, please contact our Service

Center. You can find the contact information at 

www.thomann.de

.

Troubleshooting

 

34

Gawan 200

Moving Head

Summary of Contents for Gawan 200









































Reviews:

No comments

Brands by name

Popular brands

Load more brands