Ignition Co6 LED Flood IP65 270W RGBW, User Manual

Page: 10 / 40

4 Installation
Unpack and check carefully there is no transportation damage before using the unit.
Keep the equipment packaging. To fully protect the product against vibration, dust
and moisture during transportation or storage use the original packaging or your
own packaging material suitable for transport or storage, respectively.
DANGER!
Hazardous voltage
The wiring, as well as all maintenance and repair work on the electrical
installation of the device must only be performed by qualified electrical
personnel. Failure to do so may result in electric shock and risk of fire
and loss of life.
Before starting work on the electrical installation, the device must be
turned volt-free.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules
that apply in your country. Always secure the device with a secondary
safety attachment, such as a safety cable or a safety chain.
When using the diffusion filter, the barndoor must be mounted above it.
At this, all four locking pins of the barndoor must be fully engaged.
Secure the barn door with a safety cable on the spotlight after installa‐
tion. The safety cable must run outside the barn door and must not
interfere with the light emission.
NOTICE!
Risk of overheating
The distance between light output and the illuminated surface must be
more than 1.5 m (19.7in).
Provide sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a
safe and stable position and that the weight of the device does not
exceed the maximum permissible load capacity of the stand.
Installation
10
Co6 LED Flood IP65 270W RGBW
LED floodlight