10
Wall Mounted Installation
Due to the many different materials used on different walls, it is highly recommended that
you consult your local builder before you install this appliance on the wall.
A.
Select a location that is not prone to moisture and is located at least 36" (914mm)
away from combustible materials such as curtain drapes, furniture, bedding, paper,
etc.
B.
Have two people hold the appliance against the wall to determine the final location.
C.
Place unit face down on a soft, nonabrasive surface. Remove the bracket from the
back of the unit by removing the screws, refer to Figure 1.
D.
Mark out location, then mount the bracket(s) onto the wall using the supplied
screws. This bracket MUST have the hooks facing upward and be level.
E.
With the wall mounting bracket installed, have two people lift the appliance up and
insert the two hooks on the bracket into the two slots on the back of the appliance.
F.
Check the appliance for stability ensuring that the bracket will not pull free from the
wall.
BEF-36 / 50 / 60 / 72BIF Wall Bracket Illustrated
NOTE:
It is strongly recommended
that the mounting bracket (E) be
screwed into the wall studs where
possible. If the wall studs cannot be
used, ensure that the supplied plastic
anchors are used to affix the bracket
to the wall and the bracket is
adequately secured.
