MANUAL MODE
Manual mode enables the blower and feeding screw start and stop at any time. Manual mode is very useful
at the firing up process if the feeding screw is empty.
Having the container filled with coal the feeding screw must be started and kept on till the coal appears in the retort.
Next the feeding screw must be stopped and the coal in retort partly fired up. Then the blower must be started
on and its power set accordingly ( percent figure is given on the display). If the coal in retort is completely fired up
the
MANUAL
mode must be stopped by pushing
MENU
and next -
START
.
SEQUENCE OF WIRES CONNECTION
T
AP
W
A
TER FEEDING PUMP
CENTRAL
HEA
TING PUMP
FEEDING SCREEW
BLOWER
EMERGENCY
BLOWER BREAKER
POWER
ROOM
TEMPERA
TURE SENSOR
BOILER
TEMPERA
TURE SENSOR
FEEDER
TEMPERA
TURE SENSOR
T
AP
W
A
TER CONT
AINER
TEMPERA
TURE SENSOR
WARRANTY
TMK (registered partnership) warrants 3 year product warranty for IGNIS gamma v2.15 controller. Warranty
starts in the day of purchase and cannot be longer than 4 years since production date.
WARANTY CONDITIONS
The warranty is given under condition of the unit application in accordance with this instruction literally and
general rules of the electronic units operation. TMK guarantees correct workmanship, high quality and reliability of
the IGNIS gamma v2.15 controller. In case of any malfunction or defect due to the fault of manufacturer, TMK
undertakes to repair it or replace the controller for a new one in term of 14 days since the fault product return to
producer (personally or by post).
Warranty does not include any damage caused by fault of the user, especially due to mechanical failure, incorrect
assembling, humidity or if the user fails to comply with general rules of electronic units operation.
DATE OF SALE
…………………………
…………………………
Stamp and salesman signature
…………………………
MANUFACTURER ADDRESS
TMK sp.j. (registered partnership)
Szosa Witkowska 105
62-300 Września, Poland
Tel./fax +48 61
437 97 60
mail: [email protected]
www.tmk.com.pl
MANUFACTURE DATE
