TIMELINE 3
Beyond
you
see a green field with the same blue cursor. These
are Timelines 1, 2, 3, 4 – custom timelines, where
you can put pictures in any order. If there are no
pictures in a custom timeline, it glows dim blue. If
you fill a timeline with pictures, you will see them
running in the same order as you put them.
CUSTOM TIMELINE 1-4.
TIMELINE 1
On the photo there is custom
,
the cursor is on 4th position.
TIMELINE 3
Go beyond
, , and you
get into green background, but the cursor turns red.
You are in Single Image mode. This mode has 16
positions on ascending scale, and 16 on descending
one. Those are the first 32 pictures that you can run
separately from the button. When you run the poi
from this mode, a selected image doesn’t change, it
will be displayed permanently. It can be useful on
photo sessions. Though, it's easier and more
operate single pictures from the app. Besides, Ignis
Pixel mobile app contains 126 slots for single
pictures.
SINGLE IMAGES.
On the photo there is Single Image mode,
the cursor is on 5th position.
When your poi is in Standby mode, push the button, and right after the
cursor moves up, release the button – you will see the cursor on the next position.
Thus, you can move the cursor up.
Moving the cursor UP.
When your poi is in Standby mode, push the button and hold it a
little, until the battery level scale appears. Release the button. Another short click – the cursor
gets back to the previous position. If you went far ahead and need to click many times to go
down to the 1st position, there is an easier way. Just turn off the poi and then turn it on – you
are on the 1st position.
Note: if the poi is connected to a power source (computer or USB-charger), the cursor position is
retained after turning off then on.
Moving the cursor DOWN.
rose
There is a scale to
adjust brightness from the button. To get to
the scale, run any timeline, and from this
positon click and keep holding the button until
the
cursor on the white scale appears.
Adjusting brightness.
