10
Installation Instructions
Determine if your door swings inwards or outwards and adjust the PUSH-PULL setting
on the front and back assemblies accordingly.
Door Thickness (mm)
Notch to Snap*
40 - 45
10mm (from the end)
45 - 50
5mm (from the end)
50 - 55
NA
55 - 70
NA
From the outside, if the door swings
OUTWARDS towards you
•
Front Assembly – set to PULL
•
Back Assembly – set to PUSH
From the outside, if the door swings
INWARDS away from you
•
Front Assembly – set to PUSH
•
Back Assembly – set to PULL
Front Assembly
Front Assembly
Back Assembly
Back Assembly
Cut the key cylinder accordingly for different door thickness.
5mm
10mm
* The notch to snap serves as guideline only and might
change depending on actual door conditions.
Rear of Back Assembly
Rear of Front Assembly
