Igloo RAFAL B, User Manual

Page: 14 / 36

en
14
User manual RAFA Ł B www.igloo.pl
Fig.7 Exchange of the fl uorescent lamps
1 – Grip of the fl uorescent lamp
2 – Plexi plate of the upper panel
3 – Grips
fi xing the Plexi plate
4 – PVC pro fi le
5 – Transparent casing of the fl uorescent lamp
(lampshade)
6 – Starter of the fl uorescent lamp
7 – Casing of the fl uorescent lamp
8 – Fluorescent lamp
5. MAINTENANCE
5.1. Cleaning and maintenance
All maintenance services need to be performed after disconnecting the device from power supply!
Protect electric installation against any damage or water spillage
Do not use water stream to clean the device, only a wet cloth
Do not use any sharp objects to remove dirt!
Devices with wheels cannot be used on uneven surfaces!
It is recommended to make a break in the exploitation of the device once a month in order to clean its interior,
naturally defrost the evaporator, clean the condenser and verify the condition of door seals.
Do not use mechanical agents in order to fasten the defrosting process!
I t is essential to keep the condenser of the device cle-
an. Dirt may hinder the heat exchange, causing mainly
increase in electric energy consumption and may cause
damage of aggregate compressor.
In order to clean the condenser it is necessary to
unscrew the
fi xing sheet metal screws and pull the wind
brace out. Clean condenser lamellas with help of soft
brush or paint brush. If the condenser is extremely dirty
(blocked lamellas) it is indicated to use vacuum cleaner
or compressed nitrogen to suck / blow the dirt from be-
tween lamellas.
When using the display cabinet, as well as during maintenance works, pay attention not to destroy the
temperature sensor in the evaporator screen!
Fig.6 Cleaning the condenser
2
3
1
4
5
4
5
8
7
6
Elements of device can corrode when improper used and maintenance. To avoid that please
follow the rules:
• Do not allow contact of the surface of the device with substances containing chlorine and / or baking
soda in different varieties, which destroy the protective layer and components of the device (also
includes various stainless steel)