Igloo RAFAL B, User Manual

Page: 10 / 36

en
10
User manual RAFA Ł B www.igloo.pl
Fig.1 Construction of the device 11
Fig.2 Removing the wooden platform 12
Fig.3 Mounting the hook in the frame 12
Fig.4 Rack shelf system 13
Fig.5 Control panel 13
Fig.6 Cleaning the condenser 14
Fig.7 Exchange of the fl uorescent lamp 14
Fig.8 Assembly/disassembly of the glass side 15
Fig.9 Data plate 16
Fig.10 „Igloo” thermostat control panel 17
Fig.11 „Carel” thermostat control panel 18
1. UNLOADING
The device should be transported in vertical position, and it should be properly secured and packed. The manufacturer
ships the device on a special wooden platform, secured with cardboard angle sections and foil.
2. PROPERTIES OF THE DEVICE
2.1. Purpose
“Rafa ł B” is a universal cooling device used to store and display a wide assortment of grocery products previously cooled
to storing temperature. Guaranteed temperature within the refrigerating cabinet ranges b2ºC and +8ºC with
ambient temperature ranging b15ºC and +25ºC and relative air humidity of up to 60%.
2.2. Description of the device
“Rafa ł B” rack is equipped with dynamic cooling, automatic defrosting and automatic condensate evaporation. The rack
is also equipped with electronic thermostat optionally cooperating with temperature recording module enabling to record
and signal too low and too high temperature within the device. The rack is equipped with built-in cooling aggregate. ”Rafa
ł
B” device is equipped with 3 rows of display shelves (with changed depth), with regulated depth and suspension angle.
The interior of the rack is illuminated from the top. It is possible to additionally illuminate each of the shelves. Our devices
are made according to modern technologies and have all certi
fi cates required by law.
This sign signi fi es information of particular meaning for user security and for proper device
exploitation.
Contents List of Figures
List of tables
Table 1 Technical data 11
User manual
1. UNLOADING 10
2. PROPERTIES OF THE DEVICE 10
2.1. Purpose 10
2.2. Description of the device 10
2.3. Technical data 11
3. PREPARING THE DEVICE FOR EXPLOITATION 11
3.1. Requirements concerning the place of installation 11
3.2. Connection and actuation 12
4. EXPLOITATION 13
4.1. Temperature regulation 13
5. MAINTENANCE 14
5.1. Cleaning and maintenance 14
6. SERVICE 15
6.1. Fault identi fi cation and repair 15
6.2. SERVICE 16
7. THERMOSTAT SERVICE 17
7.1. “IGLOO” thermostat 17
7.2. “CAREL” thermostat 18
en
RAFA Ł B