22
en
.
N
N
z
T
XX
z TX
NX
IGLOO.PL
Fig. 15 IGLOO thermostat panel
1 – Refrigeration on/off button
2 – Manual defrosting button
3 – Digital display
4 – Increase temperature button
5 – Decrease temperature button
6 – Button for preview of temperature on defro
-
sting sensor. Used to change the internal control
-
ler parameters
7 – Mini USB for temperature recorder
*More on www.igloo.pl
9.2. IGLOO with built-in temperature recorder (mini USB)
Check the set temperature (inside the equipment) –
Press” ” or „ ” once to check the temperature. The set
temperature appears on the display, accompanied by a blinking red dot (LED). The preview will automatically end after
about 3 seconds.
Increase or decrease the temperature - press ” (or „ ”) and the panel will display the set temperature. Press “ “ to
reduce the temperature to the desired value. The function will be deactivated automatically after about 3 seconds.
Manual defrosting –
press button 2 to start the defrosting cycle anytime (independently of the automatic defrosting func
-
tion); the button is inactive when the temperature is higher than the defrosting end temperature.
It is recommended to turn the unit on/off using only the man switch, and not the switch „ ” on the
thermostat panel. Putting the main switch to ON automatically starts the thermostat!
IMPORTANT: If the main switch is ON and the display shows only two dots, it means that the thermostat
is off and should be activated
Press the button „ ”on the thermostat panel.